Số 1, Đường Tech 9, Khu phát triển công nghệ cao và cao cấp, Hồ Songshan, thành phố Đông Quan, tỉnh Quảng Đông | sale@tonyhk.hk |
Thông tin chi tiết sản phẩm:
Thanh toán:
|
Trọng lượng đầu tác động:: | Trọng lượng thành phần đầu va đập: 25kg | Đường kính ghế tác động:: | 200mm |
---|---|---|---|
Chiều cao ghế ngồi:: | 30 ~ 65cm | Thời gian tải:: | 0 ~ 99999 lần, có thể điều chỉnh |
Điều chỉnh sức mạnh:: | Điều chỉnh cường độ: điều chỉnh áp suất | Cách nâng dầm:: | Thang máy điện |
Tiêu chuẩn: | ANSI / BIFMA X5.1-2011, EN 1335: 2000 | ||
Điểm nổi bật: | thiết bị kiểm tra đồ đạc,buồng kiểm tra độ ẩm nhiệt độ,Máy kiểm tra độ bền mặt sau của ghế |
Furniture Lab Test Equipment For Chair Backrest Tilt Mechanism Testing With BIFMA X5.1
TNJ-006 Chair Back Backward Durability Tester
Chair Back Testing Machine/ Chair Back Durability Tester/ Chair Testing Equipment
Detailed Descriptions:
Bifma X5.1 Chair backrest Tilt Mechanism Test Machine is suitable to all chairs with backward function. It is used for evaluating the durability of the chair with backward function under the loading status. Test result: Loss function after the test shall not be qualified (based on customer specified requirements can be judged).
Test purpose: Evaluate durability of the chair with backward function under the loading status.
Test object: All office chairs with back backward function.
Technical parameters of Bifma X5.1 Chair backrest Tilt Mechanism Test Machine:
Technical parameters:
Test speed: | 10-30CPM , |
chair side load | 225 lbs weight, |
Test times | 300, 000 times |
Force: 0-1000N adjustable | 0-1000N adjustable |
Load Angle of armrest: | 10 degrees |
Seat height: | 30~65cm |
Loading times: | 0~99999 times, adjustable |
Strength adjust: | pressure adjust |
Control: | PLC, text display |
Ar supply: | Seat surface height kgf/cm^2 or above |
Power: | 1 AC 220V 50Hz 5A |
Standards:
ANSI/BIFMA X5.1-2012 ,EN 1335: 2000
Test Setup:
1. The chair or fixture with attached tilt mechanism shall be restrained on a test platform. Figure 10 shows one acceptable method of restraint.
2. If adjustable features are available, all adjustments shall be set at normal use conditions
3. A cycling device shall be attached to the chair or fixture at any location appropriate to apply a controlled (push and/or pull) motion
4. A test load of 102 kg (225 lb.) shall be secured on the center of the seat (or equivalent location on the fixture).
5. Adjust the cycling device to move the mechanism between the front and back stops, without overriding or impacting either stop
Reference test method
Standards: BIFMA X5.1-2011-13 Arm Strength Test - Vertical - Static :
13.1 Applicability: This test applies to all chairs with arms.
13.2 Purpose of Test: The purpose of the test is to evaluate the ability of a chair and arm to withstand stresses caused by applying vertical forces on the arm(s).
13.4 Test Procedures
13.4.1 Functional Load
a) A force of 750 N (169 lbf.) shall be applied for one (1) minute.
b) Remove the force.
13.4.2 Proof Load
a) A force of 1125 N (253 lbf.) shall be applied for one (1) minute.
b) Remove the force.
13.5 Acceptance Level
13.5.1 Functional Load
There shall be no loss of serviceability. For a height adjustable arm, failure to hold its height
adjustment position to within 6 mm (0.25 in.) from its original set position as the result of the
loading is considered a loss of serviceability.
Người liên hệ: linmei
Tel: 86-13421721188
EN 71 Thiết bị kiểm tra tính dễ cháy cho đồ chơi Kiểm tra độ an toàn của khói thuốc
Vertical Flammability Testing Equipment For Vertical Flame Spread Test
Automatic Multi-Purpose Textile Vertical Flammability Tester With Touch Screen Control
High Precision Flammability Test Equipment ASTM E 662 Solid Materials for Smoke Density
9 KW Programmable Constant Temperature and Humidity Test Chamber
TNH-150A Programmable Temperature and Humidity Test Chamber 150 Liters
Bộ điều khiển màn hình cảm ứng LED Bộ lập trình nhiệt độ và độ ẩm
Electronic 2 KW Temperature And Humidity Test Chamber 408 Liter
Universal Dual Arm Lab Testing Equipment / Tensile Strength Test Equipment
10 KN Electronic Servo MicroComputer Wood-based Panel Tensile Testing Machine
Máy kiểm tra độ bền kéo kép toàn bộ của phòng thí nghiệm Máy tính Servo
Màn hình cảm ứng LCD lớn Màn hình cảm ứng Microcomputer Dual Arm Tensile Testing Equipment